Home >

Identification Technology Of Commonly Used Clothing Fabrics

2011/1/18 10:24:00 44

Common Fabric Ingredients

Identify

Clothing fabric

A simple method of composition is combustion.


The practice is to draw a strand of yarn containing warp and weft at the edge of the garment, ignite it with fire, observe the state of the burning flame, smell the smell of the yarn after burning, and see the residue after burning, so as to judge whether the fabric composition marked on the clothing durability label is consistent, so as to distinguish the authenticity of the fabric composition.


1. Cotton fiber and

Hemp fiber


Both cotton and hemp fibers are just burning near the flame, burning fast, the flame yellow, emitting blue smoke.

The difference between the two odours and the ashes after burning is that the burning of cotton gives out the smell of paper, and the burning of wood gives off the smell of grass and ashes. After burning, cotton has very little powder ashes, black or gray, and a small amount of ash and ashes.


Two, wool fiber and

Real silk


When the hair is smoked and smoked, it burrows when burning, burning slowly, emitting the odour of burning hair. After burning, most of the ashes are glossy black spherical particles, and fingers press and crush.

Silk shrunk into a group like fire, slow burning speed, accompanied by a sizzling sound, emitting hair fever and coke, after burning into black brown small ball ash, hand twisting.


Three, nylon and polyester fiber


Polyamide fiber, a polyamide fiber, is rapidly curled into a white colloid. It burns, burns and bubbles in the flame. There is no flame when it burns. It is difficult to continue burning after leaving the flame, and it gives off the celery flavor. After cooling, the light brown melts are not easy to be broken.

Polyester fiber

The name of polyester fiber is easy to ignite and melt near the flame. It burns black smoke when it melts. It burns yellow flame and smells fragrant. After burning, it is dark brown and hard. It can be twisted with fingers.


Four.

Acrylic fibres

Polypropylene fiber


Acrylonitrile polyacrylonitrile fiber, which melted and melted near the fire, ignited black smoke after burning. The flame was white, burning rapidly from the flame, emitting the bitterness of burning meat, burning ashes for irregular black lumps, hand twisting and fragile.

Polypropylene fiber is known as polypropylene fiber, which is near flame, which is melted and flammable. It is flammable. It burns slowly from the fire and smoked black. The flame is yellow at the top and blue at the bottom, emitting oil smell. The burnt ashes are hard round brown, and the hands are twisted and fragile.


Five, vinylon and polyvinyl chloride


Polyvinyl formal fiber is not easy to ignite, and the flame is melted and contracted at the top. There is a little flame at the top of the flame. When the fibers are melted into a jelly flame, it has a thick black smoke and a bitter fragrance.

Polyvinyl chloride fiber

The name is PVC fiber, which is difficult to burn, extinguishes from fire, the flame is yellow, and the lower part is green and white smoke. It gives off pungent, pungent, sour taste. After burning, the ashes are dark brown, irregular hard lumps, and fingers are not easy to twist.


Six, spandex and fluorine fiber


The spandex name is polyurethane fiber. It burns near the edge of the fire. When it burns, the flame is blue, leaving the fire to continue to melt and emit a special pungent odor. After burning, the ash is soft and fluffy.

Polytetrafluoroethylene (PTFE), known as fluorine fiber, is called fluorite fiber by ISO. It is only melting near flame. It is hard to ignite and burn. The edge flame is blue-green and carbonized and melted and decomposed. The gas is poisonous, and the melting material is hard round black bead.

Fluorine fiber is commonly used in the textile industry to produce high-performance sewing thread.


Seven, viscose fiber and

Cuprammonium fibre


Viscose fiber is flammable, burning fast, the flame is yellow, emitting burning paper smell, burning less ash, a smooth twisted strip gray or gray white fine powder.

Cuprammonium fiber, commonly known as tiger kapok, burns near flame, burning fast, flame yellow, emitting acid taste, burning little ash, only a small amount of gray ash.

  • Related reading

On The Basis Of "Tailoring" For Garment Sewing

Learning Area
|
2011/1/18 10:18:00
49

Questions And Answers On Clothing Processing

Learning Area
|
2011/1/18 10:01:00
59

Fur Printing Technology

Learning Area
|
2011/1/18 9:52:00
99

Discussion On The Back Warpage And Pformation Rules Of Skirt Trousers Pattern

Learning Area
|
2011/1/18 9:25:00
210

Marco Commerce Improves Fabric Insulation Performance

Learning Area
|
2011/1/18 9:30:00
25
Read the next article

Automatic Winder: Selling Point Is Not Just Technology.

It is undeniable that the hot selling of winding equipment is closely related to the industry's production. However, more enterprises are competing for equipment. The main purpose is to see that the automatic winder can improve product quality, produce no knot yarn, reduce employment and ease recruitment difficulties.